Mercurial > ~darius > hgwebdir.cgi > stm32temp
diff libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt @ 0:c59513fd84fb
Initial commit of STM32 test code.
author | Daniel O'Connor <darius@dons.net.au> |
---|---|
date | Mon, 03 Oct 2011 21:19:15 +1030 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt Mon Oct 03 21:19:15 2011 +1030 @@ -0,0 +1,104 @@ +/** + @page DAC_DualModeDMA_SineWave DAC dual mode sine wave example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file DAC/DualModeDMA_SineWave/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the DAC dual mode sine wave example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example describes how to use DAC dual channel mode with DMA to generate sine +waves on both DAC channels outputs. + +Both DAC channels conversions are configured to be triggered by TIM2 TRGO triggers +and without noise/triangle wave generation. 12bit right data alignment is selected +since we choose to access DAC_DHR12RD register. DMA2 channel4 is configured to +transfer continuously, word by word, a 32-word buffer to the dual DAC register +DAC_DHR12RD. + +The transferred 32buffer is made to have a sine wave generation on each DAC channel +output. Both DAC channels are then enabled. Only DAC channel2 DMA capability is enabled. + +Once TIM2 is enabled, each TIM2 TRGO update event generate a DMA request which +transfer data to the dual DAC register and DAC conversion is started. The sine +waves can be visualized by connecting both PA.04 and PA.05 pins to an oscilloscope. + + +@par Directory contents + + - DAC/DualModeDMA_SineWave/stm32f10x_conf.h Library Configuration file + - DAC/DualModeDMA_SineWave/stm32f10x_it.c Interrupt handlers + - DAC/DualModeDMA_SineWave/stm32f10x_it.h Header for stm32f10x_it.c + - DAC/DualModeDMA_SineWave/main.c Main program + - DAC/DualModeDMA_SineWave/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, XL-Density, Medium-Density Value line and Low-Density Value line + Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL + (High-Density Value line), STM32100B-EVAL (Medium-Density Value line), + STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and XL-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + + - STM32100E-EVAL Set-up + - Connect PA.04 and PA.05 pins to an oscilloscope + + - STM32100B-EVAL Set-up + - Connect PA.04 and PA.05 pins to an oscilloscope + + - STM3210C-EVAL Set-up + - Only PA.04 can be monitored on an oscilloscope, PA.05 is used by other + module (Motor control connector) that prevents to have DAC channel output + on it. However, if you don't use Motor control connector, you can remove + the 0ohm resistor R84 and thus PA.05 can be used for DAC output. + @note Make shure that jumper JP15 is open. + + - STM3210E-EVAL Set-up + - Connect PA.04 and PA.05 pins to an oscilloscope + + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> + */