Mercurial > ~darius > hgwebdir.cgi > tempctrl
diff tempctrl.c @ 54:58f1ec46bff6
Add a beeper when the data is stale (only when USB is disabled as they share
a pin)
Move the time of day timer to OCR2 so we can use PB3/OC0 for PWM.
author | darius@Inchoate |
---|---|
date | Wed, 29 Oct 2008 17:41:04 +1030 |
parents | cb184206344d |
children | 6b1057409d9a |
line wrap: on
line diff
--- a/tempctrl.c Wed Oct 29 16:11:15 2008 +1030 +++ b/tempctrl.c Wed Oct 29 17:41:04 2008 +1030 @@ -52,7 +52,6 @@ uint8_t ambient_ROM[8]; int16_t target_temp; uint16_t hysteresis; - /* How much to under/overshoot on heating/cooling */ int16_t minheatovershoot; int16_t mincoolovershoot; @@ -80,6 +79,9 @@ /* Check/stale times */ int16_t check_interval; int16_t stale_factor; + + /* Beep if stale */ + int8_t dobeep; } __attribute__((packed)) settings_t; /* Current settings in RAM */ @@ -109,11 +111,16 @@ .heatbits = _BV(7), .idlebits = 0x00, .check_interval = 10, - .stale_factor = 3 + .stale_factor = 3, + .dobeep = 1 }; /* Local variable declarations */ volatile static time_t now; +#ifndef WITHUSB +volatile static uint8_t beeping = 0; +volatile static uint8_t lasttoggle = 0; +#endif /* Local function prototypes */ static void tempctrl_load_or_init_settings(void); @@ -135,13 +142,13 @@ /* 16Mhz / 1024 = 15625 Hz / 125 = 125 Hz = IRQ every 8 ms */ /* CTC mode, no output on pin, Divide clock by 1024 */ - TCCR0 = _BV(WGM01)| _BV(CS02) | _BV(CS00); + TCCR2 = _BV(WGM21)| _BV(CS22) | _BV(CS21) | _BV(CS20); /* Compare with ... */ - OCR0 = 125; + OCR2 = 125; /* Enable interrupt for match on A */ - TIMSK = _BV(OCIE0); + TIMSK = _BV(OCIE2); now.sec = 0; now.usec = 0; @@ -150,12 +157,12 @@ } /* - * Timer 0 Compare IRQ + * Timer 2 Compare IRQ * * Update time counter */ -ISR(TIMER0_COMP_vect) { +ISR(TIMER2_COMP_vect) { wdt_reset(); now.usec += 8000; /* 1000000 * 1 / F_CPU / 1024 / 125 */ @@ -163,6 +170,20 @@ now.usec -= 1000000; now.sec++; } + +#ifndef WITHUSB + if (beeping) { + lasttoggle++; + // 63 * 8ms = ~0.5s + if (lasttoggle > 63) { + DDRB ^= _BV(PB3); + lasttoggle = 0; + } + } else { + DDRB &= ~_BV(PB3); + lasttoggle = 0; + } +#endif } /* @@ -265,6 +286,12 @@ if (stale) nextstate = 'i'; + /* Handle beeping */ + if (settings.dobeep && stale) + beeping = 1; + else + beeping = 0; + /* Handle state forcing */ if (settings.mode != TC_MODE_AUTO) forced = 1; @@ -439,6 +466,9 @@ " h Always heat\r\n" " i Always idle\r\n" " n Like idle but don't log anything\r\n" +#ifndef WITHUSB + "tc beep [01] Enable/disable beeping when data is stale\r\n" +#endif "tc X Y Set X to Y where X is one of\r\n" " targ Target temperature\r\n" " hys Hysteresis range\r\n" @@ -477,7 +507,8 @@ "Mode - %c, Target - %d, Hystersis - %d\r\n" "Min heat overshoot - %d, Min cool overshoot - %d\r\n" "Min cool on time - %d, Min cool off time - %d\r\n" - "Min heat on time - %d, Min heat off time - %d\r\n"), + "Min heat on time - %d, Min heat off time - %d\r\n" + "Beep on stale - %S\r\n"), settings.fermenter_ROM[0], settings.fermenter_ROM[1], settings.fermenter_ROM[2], settings.fermenter_ROM[3], settings.fermenter_ROM[4], settings.fermenter_ROM[5], settings.fermenter_ROM[6], settings.fermenter_ROM[7], settings.fridge_ROM[0], settings.fridge_ROM[1], settings.fridge_ROM[2], settings.fridge_ROM[3], @@ -487,7 +518,8 @@ settings.mode, settings.target_temp, settings.hysteresis, settings.minheatovershoot, settings.mincoolovershoot, settings.mincoolontime, settings.minheatontime, - settings.minheatontime, settings.minheatofftime); + settings.minheatontime, settings.minheatofftime, + settings.dobeep ? PSTR("yes") : PSTR("no")); return; } if (!strcasecmp_P(cmd, PSTR("mode"))) { @@ -506,6 +538,15 @@ } return; } + if (!strcasecmp_P(cmd, PSTR("beep"))) { + if (buf[8] == '1') + settings.dobeep = 1; + else if (buf[8] == '0') + settings.dobeep = 0; + else + printf_P(PSTR("Expected a 0 or 1\r\n")); + return; + } if (!strcasecmp_P(cmd, PSTR("ferm")) || !strcasecmp_P(cmd, PSTR("frg")) || !strcasecmp_P(cmd, PSTR("amb"))) {