Mercurial > ~darius > hgwebdir.cgi > stm32test

comparison main.c @ 4:2c87e30c982d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Add LCD init, touch screen writing etc.. PWM of LCD backlight doesn't work yet though..
author Daniel O'Connor <darius@dons.net.au>
date Tue, 03 Jan 2012 22:37:18 +1030
parents 74e9b3baac1e
children efa2c22266e3
comparison
equal deleted inserted replaced
3:74e9b3baac1e 4:2c87e30c982d
125 /* Set stdout to unbuffered */ 125 /* Set stdout to unbuffered */
126 setvbuf(stdout, NULL, _IONBF, 0); 126 setvbuf(stdout, NULL, _IONBF, 0);
127 127
128 /* Say hello */ 128 /* Say hello */
129 fputs("\r\nHello world\r\n", stdout); 129 fputs("\r\nHello world\r\n", stdout);
130
131 #define Bank1_LCD_D ((uint32_t)0x60020000) //disp Data ADDR
132 #define Bank1_LCD_C ((uint32_t)0x60000000) //disp Reg ADDR
133 130
134 while (1) { 131 while (1) {
135 fputs("> ", stdout); 132 fputs("> ", stdout);
136 133
137 while (cmd.state != 255) 134 while (cmd.state != 255)
147 struct timeval tv; 144 struct timeval tv;
148 tv.tv_sec = atoi(cmd.buf + 3); 145 tv.tv_sec = atoi(cmd.buf + 3);
149 tv.tv_usec = 0; 146 tv.tv_usec = 0;
150 settimeofday(&tv, NULL); 147 settimeofday(&tv, NULL);
151 } else if (!strncmp("lcd", cmd.buf, 3)) { 148 } else if (!strncmp("lcd", cmd.buf, 3)) {
152 *(__IO uint16_t *) (Bank1_LCD_C) = 0x00; 149 printf("LCD ID = %hx\r\n", LCD_RD_Reg(0x00));
153 printf("LCD ID = %hx\r\n", *(__IO uint16_t *) (Bank1_LCD_D));
154 } else if (!strncmp("read", cmd.buf, 4)) { 150 } else if (!strncmp("read", cmd.buf, 4)) {
155 printf("PB5 = %d\r\n", GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_15)); 151 printf("PB5 = %d\r\n", GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_15));
152 } else if (!strncmp("touch", cmd.buf, 5)) {
153 for (int i = 0; i < 10; i++) {
154 uint16_t x, y, z1, z2;
155 float t, t2;
156
157 x = TPRead(TP_READ_SEL(TP_CHAN_X, TP_MODE_12, TP_REF_DIFF, TP_PD_ON));
158 y = TPRead(TP_READ_SEL(TP_CHAN_Y, TP_MODE_12, TP_REF_DIFF, TP_PD_ON));
159 z1 = TPRead(TP_READ_SEL(TP_CHAN_Z1, TP_MODE_12, TP_REF_DIFF, TP_PD_ON));
160 z2 = TPRead(TP_READ_SEL(TP_CHAN_Z2, TP_MODE_12, TP_REF_DIFF, TP_PD_ON));
161 t = ((float)x / 4096.0) * (((float)z2 / (float)z1) - 1);
162 t2 = (((float)x / 4096) * ((4096.0 / (float)z1) - 1)) - (1 - ((float)y / (float)4096.0));
163 printf("X = %5d Y = %5d Z1 = %5d Z2 = %5d T = %7.2f T2 = %7.2f\r\n", x, y, z1, z2, t, t2);
164 }
165 } else if (!strncmp("fl", cmd.buf, 2)) {
166 uint8_t status;
167 char *flstattbl[] = {
168 "BUSY",
169 "WEL",
170 "BP0",
171 "BP1",
172 "BP2",
173 "BP3",
174 "AAI",
175 "BPL"
176 };
177
178 printf("Flash ID = 0x%04hx (expect 0xbf41)\r\n", FlashReadID());
179 status = FlashReadStatus();
180
181 fputs("Status = ", stdout);
182 for (unsigned int i = 0; i < sizeof(flstattbl) / sizeof(flstattbl[0]); i++)
183 if (status & 1 << i) {
184 fputs(flstattbl[i], stdout);
185 fputs(" ", stdout);
186 }
187 printf("(0x%02x)\r\n", status);
188
189 FlashWriteStatus(0x00);
190
191 status = FlashReadStatus();
192
193 fputs("Status = ", stdout);
194 for (unsigned int i = 0; i < sizeof(flstattbl) / sizeof(flstattbl[0]); i++)
195 if (status & 1 << i) {
196 fputs(flstattbl[i], stdout);
197 fputs(" ", stdout);
198 }
199 printf("(0x%02x)\r\n", status);
156 } else if (!strncmp("zz", cmd.buf, 2)) { 200 } else if (!strncmp("zz", cmd.buf, 2)) {
157 NVIC_SystemReset(); 201 NVIC_SystemReset();
158 } else { 202 } else {
159 printf("Unknown command\r\n"); 203 printf("Unknown command\r\n");
160 } 204 }
209 253
210 /* Wait until last write operation on RTC registers has finished */ 254 /* Wait until last write operation on RTC registers has finished */
211 RTC_WaitForLastTask(); 255 RTC_WaitForLastTask();
212 256
213 /* Clock setup */ 257 /* Clock setup */
214 /* Enable clocks we need */ 258 RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
215 RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
216 RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |
217 RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO, ENABLE);
218 259
219 /* Port configuration */ 260 /* Port configuration */
220 /* Configure USART1 TX (PA.09) as alternate function push-pull */ 261 /* Configure USART1 TX (PA.09) as alternate function push-pull */
221 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; 262 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
222 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 263 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
226 /* Configure USART1 RX (PA.10) as input floating */ 267 /* Configure USART1 RX (PA.10) as input floating */
227 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; 268 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
228 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; 269 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
229 GPIO_Init(GPIOA, &GPIO_InitStructure); 270 GPIO_Init(GPIOA, &GPIO_InitStructure);
230 271
231 /* Configure PB5 as output push-pull */ 272 /* Enable GPIOB clock */
273 RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
274
275 /* Configure PB5 as output push-pull for LED */
232 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5; 276 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
233 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 277 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
234 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; 278 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
235 GPIO_Init(GPIOB, &GPIO_InitStructure); 279 GPIO_Init(GPIOB, &GPIO_InitStructure);
236 280
237 /* Configure PB15 as input pull-up push-pull */ 281 /* Configure PB15 as input pull-up push-pull for push button */
238 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; 282 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15;
239 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 283 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
240 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; 284 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
241 GPIO_Init(GPIOB, &GPIO_InitStructure); 285 GPIO_Init(GPIOB, &GPIO_InitStructure);
242 286