Mercurial > ~darius > hgwebdir.cgi > stm32temp
graph
-
Add routine to CRC a block of flash. Use it to verify a flash block write.Sun, 14 Apr 2013 22:53:50 +0930, by Daniel O'Connor
-
CRC a word at a time rather than the whole block (since we are reading/writing a word at a time).Sun, 14 Apr 2013 22:52:21 +0930, by Daniel O'Connor
-
Handle missing modules in OWGetTemp.Sun, 14 Apr 2013 16:07:29 +0930, by Daniel O'Connor
-
Don't complain about CRC mismatch in flashreadblock.Sun, 14 Apr 2013 14:29:08 +0930, by Daniel O'Connor
-
Rename settings to tc_settings as it's global.Sun, 14 Apr 2013 14:28:14 +0930, by Daniel O'Connor
-
Convert \r\n to \n.Sun, 14 Apr 2013 14:26:46 +0930, by Daniel O'Connor
-
- Make sure the line is high before pulling low for reset.Sun, 14 Apr 2013 14:25:51 +0930, by Daniel O'Connor
-
Scan before attaching in case the BMP has been power cycled.Tue, 09 Apr 2013 17:09:19 +0930, by Daniel O'Connor
-
The LCD works better when the GPIO clocks are enabled before frobbing them.Tue, 09 Apr 2013 00:28:29 +0930, by Daniel O'Connor
-
Make 'td log' work without printing an error.Mon, 08 Apr 2013 23:11:55 +0930, by Daniel O'Connor
-
Convert \r\n -> \n now _write() DTRT.Mon, 08 Apr 2013 23:11:35 +0930, by Daniel O'Connor
-
Don't print extra newlines when cat'ing a file.Mon, 08 Apr 2013 23:10:47 +0930, by Daniel O'Connor
-
Get timezone offsets right.Mon, 08 Apr 2013 23:10:25 +0930, by Daniel O'Connor
-
Add the ability to log temperatures to SD card.Mon, 08 Apr 2013 22:20:40 +0930, by Daniel O'Connor
-
Fix more warnings. Note the 'buf might be used uninitialised' warning appears to be a GCC bug.Sun, 07 Apr 2013 22:44:23 +0930, by Daniel O'Connor
-
Enable DMA mode by initing DMA channel and enabling IRQ handler.Sun, 07 Apr 2013 22:34:05 +0930, by Daniel O'Connor
-
Fix comment style.Sun, 07 Apr 2013 22:33:16 +0930, by Daniel O'Connor
-
Add all the interrupt sources.Sun, 07 Apr 2013 22:32:48 +0930, by Daniel O'Connor
-
Fix various warnings.Sun, 07 Apr 2013 22:31:56 +0930, by Daniel O'Connor
-
Return correct error defines.Sun, 07 Apr 2013 22:31:05 +0930, by Daniel O'Connor
-
Add write support. LFN still broken though.Fri, 05 Apr 2013 00:08:31 +1030, by Daniel O'Connor
-
Add SDIO code poached from STM. Use FatFS to read from SD card.Wed, 03 Apr 2013 23:34:20 +1030, by Daniel O'Connor
-
Ignore more emacs crap.Wed, 03 Apr 2013 23:33:47 +1030, by Daniel O'Connor
-
Use -O2 to make debugging slightly less annoying.Wed, 03 Apr 2013 23:30:14 +1030, by Daniel O'Connor
-
When writing to stdout/stderr translate \n to \r\n.Wed, 03 Apr 2013 23:29:16 +1030, by Daniel O'Connor
-
Add sprinkler control stubs for testingTue, 02 Apr 2013 14:49:50 +1030, by Daniel O'Connor
-
Remove useless delay test. Add GPIO PE2 changes to make testing arbitary delays possible.Tue, 02 Apr 2013 10:54:20 +1030, by Daniel O'Connor
-
Fix 'none' mode.Mon, 01 Apr 2013 23:38:34 +1030, by Daniel O'Connor
-
Store port & pin as char & number and map.Mon, 01 Apr 2013 21:12:57 +1030, by Daniel O'Connor
-
Remove unused timer and (broken) I2C code.Mon, 01 Apr 2013 20:51:11 +1030, by Daniel O'Connor
-
Use debug cycle counter to handle delays.Mon, 01 Apr 2013 20:06:03 +1030, by Daniel O'Connor
-
- Remove superfluous debug message.Mon, 01 Apr 2013 19:45:38 +1030, by Daniel O'Connor
-
Remove kludgy delays.Mon, 01 Apr 2013 19:45:19 +1030, by Daniel O'Connor
-
Use -O3 so short delay loops work for 1 wire.Mon, 01 Apr 2013 19:44:47 +1030, by Daniel O'Connor
-
Don't use evil errno kludge, write a function that libc can use.Tue, 26 Mar 2013 15:09:46 +1030, by Daniel O'Connor
-
Add 'cyc' command to test CM3 debug cycle counter.Mon, 11 Mar 2013 19:52:03 +1030, by Daniel O'Connor
-
Update to reflect reality (ish)Mon, 11 Mar 2013 19:51:34 +1030, by Daniel O'Connor
-
Create a TZ info structure for ACST and use it when printing times.Tue, 27 Nov 2012 15:56:31 +1030, by Daniel O'Connor
-
Readd code accidentally removed from last version, now the hot & coldTue, 27 Nov 2012 15:56:09 +1030, by Daniel O'Connor
-
Port tempctrl.c from AVR. I removed the beep code as I don't have aTue, 27 Nov 2012 13:20:52 +1030, by Daniel O'Connor
-
Set tv_usec in gettimeofday() by using the prescaler counter.Tue, 27 Nov 2012 13:19:11 +1030, by Daniel O'Connor
-
Updated BMP has a different port name.Tue, 27 Nov 2012 13:17:42 +1030, by Daniel O'Connor
-
- Add depend target.Tue, 27 Nov 2012 13:16:47 +1030, by Daniel O'Connor
-
Add flashread/writeblock commands which read/write a block of data toTue, 20 Nov 2012 21:54:06 +1030, by Daniel O'Connor
-
Use a 32 bit var to hold address from atoi().Sat, 17 Nov 2012 18:03:48 +1030, by Daniel O'Connor
-
Add stream read/write commands.Sat, 17 Nov 2012 12:18:24 +1030, by Daniel O'Connor
-
Reduce prescaler to 2, the flash is capable of 25MHz reads (althoughSat, 17 Nov 2012 12:17:58 +1030, by Daniel O'Connor
-
Use CR/LF to printfs (should probably do the conversion in _write)Sat, 17 Nov 2012 12:15:17 +1030, by Daniel O'Connor
-
Add test for assertSat, 17 Nov 2012 12:14:38 +1030, by Daniel O'Connor
-
- Add flash erase, write & read commands (needs more work).Thu, 15 Nov 2012 23:40:51 +1030, by Daniel O'Connor
-
Fix debug & load targets for BMP.Wed, 14 Nov 2012 12:47:10 +1030, by Daniel O'Connor
-
Fix typoWed, 14 Nov 2012 12:46:48 +1030, by Daniel O'Connor
-
Add i2c test codeWed, 14 Nov 2012 12:30:58 +1030, by Daniel O'Connor
-
Catch up with new toolchain locationWed, 14 Nov 2012 12:30:29 +1030, by Daniel O'Connor
-
Use new delay routine on pin 2 so it doesn't interfere with 1 wire.Wed, 14 Nov 2012 12:30:05 +1030, by Daniel O'Connor
-
Use corrected delay() routine.Wed, 14 Nov 2012 12:24:44 +1030, by Daniel O'Connor
-
Fix delay() to be accurate as measured on the cro.Wed, 14 Nov 2012 12:24:21 +1030, by Daniel O'Connor
-
Add 1wire code.Wed, 08 Feb 2012 10:37:22 +1030, by Daniel O'Connor
-
Add delay, ellipse and line demos.Mon, 06 Feb 2012 23:55:53 +1030, by Daniel O'Connor
-
Add _usleep16 prototype.Mon, 06 Feb 2012 23:55:11 +1030, by Daniel O'Connor