Mercurial > ~darius > hgwebdir.cgi > stm32temp
graph
-
Fix RAM sizes.2013-04-15, by Daniel O'Connor
-
Update README with some more details about the various boards.2013-04-15, by Daniel O'Connor
-
Comment out debug message.2013-04-14, by Daniel O'Connor
-
Add routine to CRC a block of flash. Use it to verify a flash block write.2013-04-14, by Daniel O'Connor
-
CRC a word at a time rather than the whole block (since we are reading/writing a word at a time).2013-04-14, by Daniel O'Connor
-
Handle missing modules in OWGetTemp.2013-04-14, by Daniel O'Connor
-
Don't complain about CRC mismatch in flashreadblock.2013-04-14, by Daniel O'Connor
-
Rename settings to tc_settings as it's global.2013-04-14, by Daniel O'Connor
-
Convert \r\n to \n.2013-04-14, by Daniel O'Connor
-
- Make sure the line is high before pulling low for reset.2013-04-14, by Daniel O'Connor
-
Scan before attaching in case the BMP has been power cycled.2013-04-09, by Daniel O'Connor
-
The LCD works better when the GPIO clocks are enabled before frobbing them.2013-04-08, by Daniel O'Connor
-
Make 'td log' work without printing an error.2013-04-08, by Daniel O'Connor
-
Convert \r\n -> \n now _write() DTRT.2013-04-08, by Daniel O'Connor
-
Don't print extra newlines when cat'ing a file.2013-04-08, by Daniel O'Connor
-
Get timezone offsets right.2013-04-08, by Daniel O'Connor
-
Add the ability to log temperatures to SD card.2013-04-08, by Daniel O'Connor
-
Fix more warnings. Note the 'buf might be used uninitialised' warning appears to be a GCC bug.2013-04-07, by Daniel O'Connor
-
Enable DMA mode by initing DMA channel and enabling IRQ handler.2013-04-07, by Daniel O'Connor
-
Fix comment style.2013-04-07, by Daniel O'Connor
-
Add all the interrupt sources.2013-04-07, by Daniel O'Connor
-
Fix various warnings.2013-04-07, by Daniel O'Connor
-
Return correct error defines.2013-04-07, by Daniel O'Connor
-
Add write support. LFN still broken though.2013-04-04, by Daniel O'Connor
-
Add SDIO code poached from STM. Use FatFS to read from SD card.2013-04-03, by Daniel O'Connor
-
Ignore more emacs crap.2013-04-03, by Daniel O'Connor
-
Use -O2 to make debugging slightly less annoying.2013-04-03, by Daniel O'Connor
-
When writing to stdout/stderr translate \n to \r\n.2013-04-03, by Daniel O'Connor
-
Add sprinkler control stubs for testing2013-04-02, by Daniel O'Connor
-
Remove useless delay test. Add GPIO PE2 changes to make testing arbitary delays possible.2013-04-02, by Daniel O'Connor
-
Fix 'none' mode.2013-04-01, by Daniel O'Connor
-
Store port & pin as char & number and map.2013-04-01, by Daniel O'Connor
-
Remove unused timer and (broken) I2C code.2013-04-01, by Daniel O'Connor
-
Use debug cycle counter to handle delays.2013-04-01, by Daniel O'Connor
-
- Remove superfluous debug message.2013-04-01, by Daniel O'Connor
-
Remove kludgy delays.2013-04-01, by Daniel O'Connor
-
Use -O3 so short delay loops work for 1 wire.2013-04-01, by Daniel O'Connor
-
Don't use evil errno kludge, write a function that libc can use.2013-03-26, by Daniel O'Connor
-
Add 'cyc' command to test CM3 debug cycle counter.2013-03-11, by Daniel O'Connor
-
Update to reflect reality (ish)2013-03-11, by Daniel O'Connor
-
Create a TZ info structure for ACST and use it when printing times.2012-11-27, by Daniel O'Connor
-
Readd code accidentally removed from last version, now the hot & cold2012-11-27, by Daniel O'Connor
-
Port tempctrl.c from AVR. I removed the beep code as I don't have a2012-11-27, by Daniel O'Connor
-
Set tv_usec in gettimeofday() by using the prescaler counter.2012-11-27, by Daniel O'Connor
-
Updated BMP has a different port name.2012-11-27, by Daniel O'Connor
-
- Add depend target.2012-11-27, by Daniel O'Connor
-
Add flashread/writeblock commands which read/write a block of data to2012-11-20, by Daniel O'Connor
-
Use a 32 bit var to hold address from atoi().2012-11-17, by Daniel O'Connor
-
Add stream read/write commands.2012-11-17, by Daniel O'Connor
-
Reduce prescaler to 2, the flash is capable of 25MHz reads (although2012-11-17, by Daniel O'Connor
-
Use CR/LF to printfs (should probably do the conversion in _write)2012-11-17, by Daniel O'Connor
-
Add test for assert2012-11-17, by Daniel O'Connor
-
- Add flash erase, write & read commands (needs more work).2012-11-15, by Daniel O'Connor
-
Fix debug & load targets for BMP.2012-11-14, by Daniel O'Connor
-
Fix typo2012-11-14, by Daniel O'Connor
-
Add i2c test code2012-11-14, by Daniel O'Connor
-
Catch up with new toolchain location2012-11-14, by Daniel O'Connor
-
Use new delay routine on pin 2 so it doesn't interfere with 1 wire.2012-11-14, by Daniel O'Connor
-
Use corrected delay() routine.2012-11-14, by Daniel O'Connor
-
Fix delay() to be accurate as measured on the cro.2012-11-14, by Daniel O'Connor
-
Add 1wire code.2012-02-08, by Daniel O'Connor
-
Add delay, ellipse and line demos.2012-02-06, by Daniel O'Connor
-
Add _usleep16 prototype.2012-02-06, by Daniel O'Connor
-
Add _usleep16 - sleeps for cnt microseconds.2012-02-06, by Daniel O'Connor
-
- Add ellipse drawing.2012-02-05, by Daniel O'Connor
-
Split out code into separate files.2012-02-04, by Daniel O'Connor
-
Make the LCD panel work (timings, GPIOE clock needs to be on, etc)2012-01-22, by Daniel O'Connor
-
Add LCD app note.2012-01-14, by Daniel O'Connor
-
PWM control LED backlight.2012-01-05, by Daniel O'Connor
-
Add LCD init, touch screen writing etc..2012-01-03, by Daniel O'Connor
-
Jumbo commit to make things work.2012-01-01, by Daniel O'Connor
-
- Do console IO with RX IRQs.2011-10-08, by Daniel O'Connor
-
Split out compile flags for easier editing.2011-10-08, by Daniel O'Connor
-
Initial commit of STM32 test code.2011-10-03, by Daniel O'Connor