Mercurial > ~darius > hgwebdir.cgi > stm32temp
graph
-
Remove kludgy delays.2013-04-01, by Daniel O'Connor
-
Use -O3 so short delay loops work for 1 wire.2013-04-01, by Daniel O'Connor
-
Don't use evil errno kludge, write a function that libc can use.2013-03-26, by Daniel O'Connor
-
Add 'cyc' command to test CM3 debug cycle counter.2013-03-11, by Daniel O'Connor
-
Update to reflect reality (ish)2013-03-11, by Daniel O'Connor
-
Create a TZ info structure for ACST and use it when printing times.2012-11-27, by Daniel O'Connor
-
Readd code accidentally removed from last version, now the hot & cold2012-11-27, by Daniel O'Connor
-
Port tempctrl.c from AVR. I removed the beep code as I don't have a2012-11-27, by Daniel O'Connor
-
Set tv_usec in gettimeofday() by using the prescaler counter.2012-11-27, by Daniel O'Connor
-
Updated BMP has a different port name.2012-11-27, by Daniel O'Connor
-
- Add depend target.2012-11-27, by Daniel O'Connor
-
Add flashread/writeblock commands which read/write a block of data to2012-11-20, by Daniel O'Connor
-
Use a 32 bit var to hold address from atoi().2012-11-17, by Daniel O'Connor
-
Add stream read/write commands.2012-11-17, by Daniel O'Connor
-
Reduce prescaler to 2, the flash is capable of 25MHz reads (although2012-11-17, by Daniel O'Connor
-
Use CR/LF to printfs (should probably do the conversion in _write)2012-11-17, by Daniel O'Connor
-
Add test for assert2012-11-17, by Daniel O'Connor
-
- Add flash erase, write & read commands (needs more work).2012-11-15, by Daniel O'Connor
-
Fix debug & load targets for BMP.2012-11-14, by Daniel O'Connor
-
Fix typo2012-11-14, by Daniel O'Connor
-
Add i2c test code2012-11-14, by Daniel O'Connor
-
Catch up with new toolchain location2012-11-14, by Daniel O'Connor
-
Use new delay routine on pin 2 so it doesn't interfere with 1 wire.2012-11-14, by Daniel O'Connor
-
Use corrected delay() routine.2012-11-14, by Daniel O'Connor
-
Fix delay() to be accurate as measured on the cro.2012-11-14, by Daniel O'Connor
-
Add 1wire code.2012-02-08, by Daniel O'Connor
-
Add delay, ellipse and line demos.2012-02-06, by Daniel O'Connor
-
Add _usleep16 prototype.2012-02-06, by Daniel O'Connor
-
Add _usleep16 - sleeps for cnt microseconds.2012-02-06, by Daniel O'Connor
-
- Add ellipse drawing.2012-02-05, by Daniel O'Connor
-
Split out code into separate files.2012-02-04, by Daniel O'Connor
-
Make the LCD panel work (timings, GPIOE clock needs to be on, etc)2012-01-22, by Daniel O'Connor
-
Add LCD app note.2012-01-14, by Daniel O'Connor
-
PWM control LED backlight.2012-01-05, by Daniel O'Connor
-
Add LCD init, touch screen writing etc..2012-01-03, by Daniel O'Connor
-
Jumbo commit to make things work.2012-01-01, by Daniel O'Connor
-
- Do console IO with RX IRQs.2011-10-08, by Daniel O'Connor
-
Split out compile flags for easier editing.2011-10-08, by Daniel O'Connor
-
Initial commit of STM32 test code.2011-10-03, by Daniel O'Connor