Mercurial > ~darius > hgwebdir.cgi > stm32temp
view stm32_eval_sdio_sd.h @ 81:d7002925c15d
Fix compilation on newer toolchain.
http://www.atollic.com/index.php/kb/1-kb_building/117-kb_error_in_strexb
| author | Daniel O'Connor <darius@dons.net.au> |
|---|---|
| date | Mon, 02 Mar 2015 14:30:58 +1030 |
| parents | ace431a0d0f5 |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32_eval_sdio_sd.h * @author MCD Application Team * @version V4.5.0 * @date 07-March-2011 * @brief This file contains all the functions prototypes for the SD Card * stm32_eval_sdio_sd driver firmware library. ****************************************************************************** * @attention * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32_EVAL_SDIO_SD_H #define __STM32_EVAL_SDIO_SD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32_eval.h" /** @addtogroup Utilities * @{ */ /** @addtogroup STM32_EVAL * @{ */ /** @addtogroup Common * @{ */ /** @addtogroup STM32_EVAL_SDIO_SD * @{ */ /** @defgroup STM32_EVAL_SDIO_SD_Exported_Types * @{ */ typedef enum { /** * @brief SDIO specific error defines */ SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ SD_DATA_CRC_FAIL = (2), /*!< Data bock sent/received (CRC check Failed) */ SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ SD_DATA_TIMEOUT = (4), /*!< Data time out */ SD_TX_UNDERRUN = (5), /*!< Transmit FIFO under-run */ SD_RX_OVERRUN = (6), /*!< Receive FIFO over-run */ SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in widE bus mode */ SD_CMD_OUT_OF_RANGE = (8), /*!< CMD's argument was out of range.*/ SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs.*/ SD_BAD_ERASE_PARAM = (12), /*!< An Invalid selection for erase groups */ SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ SD_CC_ERROR = (18), /*!< Internal card controller error */ SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or Unknown error */ SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ SD_WP_ERASE_SKIP = (23), /*!< only partial address space was erased */ SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ SD_INVALID_VOLTRANGE = (27), SD_ADDR_OUT_OF_RANGE = (28), SD_SWITCH_ERROR = (29), SD_SDIO_DISABLED = (30), SD_SDIO_FUNCTION_BUSY = (31), SD_SDIO_FUNCTION_FAILED = (32), SD_SDIO_UNKNOWN_FUNCTION = (33), /** * @brief Standard error defines */ SD_INTERNAL_ERROR, SD_NOT_CONFIGURED, SD_REQUEST_PENDING, SD_REQUEST_NOT_APPLICABLE, SD_INVALID_PARAMETER, SD_UNSUPPORTED_FEATURE, SD_UNSUPPORTED_HW, SD_ERROR, SD_OK = 0 } SD_Error; /** * @brief SDIO Transfer state */ typedef enum { SD_TRANSFER_OK = 0, SD_TRANSFER_BUSY = 1, SD_TRANSFER_ERROR } SDTransferState; /** * @brief SD Card States */ typedef enum { SD_CARD_READY = ((uint32_t)0x00000001), SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), SD_CARD_STANDBY = ((uint32_t)0x00000003), SD_CARD_TRANSFER = ((uint32_t)0x00000004), SD_CARD_SENDING = ((uint32_t)0x00000005), SD_CARD_RECEIVING = ((uint32_t)0x00000006), SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), SD_CARD_ERROR = ((uint32_t)0x000000FF) }SDCardState; /** * @brief Card Specific Data: CSD Register */ typedef struct { __IO uint8_t CSDStruct; /*!< CSD structure */ __IO uint8_t SysSpecVersion; /*!< System specification version */ __IO uint8_t Reserved1; /*!< Reserved */ __IO uint8_t TAAC; /*!< Data read access-time 1 */ __IO uint8_t NSAC; /*!< Data read access-time 2 in CLK cycles */ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ __IO uint16_t CardComdClasses; /*!< Card command classes */ __IO uint8_t RdBlockLen; /*!< Max. read data block length */ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ __IO uint8_t DSRImpl; /*!< DSR implemented */ __IO uint8_t Reserved2; /*!< Reserved */ __IO uint32_t DeviceSize; /*!< Device Size */ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ __IO uint8_t EraseGrSize; /*!< Erase group size */ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ __IO uint8_t WrSpeedFact; /*!< Write speed factor */ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ __IO uint8_t Reserved3; /*!< Reserded */ __IO uint8_t ContentProtectAppli; /*!< Content protection application */ __IO uint8_t FileFormatGrouop; /*!< File format group */ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ __IO uint8_t PermWrProtect; /*!< Permanent write protection */ __IO uint8_t TempWrProtect; /*!< Temporary write protection */ __IO uint8_t FileFormat; /*!< File Format */ __IO uint8_t ECC; /*!< ECC code */ __IO uint8_t CSD_CRC; /*!< CSD CRC */ __IO uint8_t Reserved4; /*!< always 1*/ } SD_CSD; /** * @brief Card Identification Data: CID Register */ typedef struct { __IO uint8_t ManufacturerID; /*!< ManufacturerID */ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ __IO uint32_t ProdName1; /*!< Product Name part1 */ __IO uint8_t ProdName2; /*!< Product Name part2*/ __IO uint8_t ProdRev; /*!< Product Revision */ __IO uint32_t ProdSN; /*!< Product Serial Number */ __IO uint8_t Reserved1; /*!< Reserved1 */ __IO uint16_t ManufactDate; /*!< Manufacturing Date */ __IO uint8_t CID_CRC; /*!< CID CRC */ __IO uint8_t Reserved2; /*!< always 1 */ } SD_CID; /** * @brief SD Card Status */ typedef struct { __IO uint8_t DAT_BUS_WIDTH; __IO uint8_t SECURED_MODE; __IO uint16_t SD_CARD_TYPE; __IO uint32_t SIZE_OF_PROTECTED_AREA; __IO uint8_t SPEED_CLASS; __IO uint8_t PERFORMANCE_MOVE; __IO uint8_t AU_SIZE; __IO uint16_t ERASE_SIZE; __IO uint8_t ERASE_TIMEOUT; __IO uint8_t ERASE_OFFSET; } SD_CardStatus; /** * @brief SD Card information */ typedef struct { SD_CSD SD_csd; SD_CID SD_cid; uint32_t CardCapacity; /*!< Card Capacity */ uint32_t CardBlockSize; /*!< Card Block Size */ uint16_t RCA; uint8_t CardType; } SD_CardInfo; /** * @} */ /** @defgroup STM32_EVAL_SDIO_SD_Exported_Constants * @{ */ /** * @brief SDIO Commands Index */ #define SD_CMD_GO_IDLE_STATE ((uint8_t)0) #define SD_CMD_SEND_OP_COND ((uint8_t)1) #define SD_CMD_ALL_SEND_CID ((uint8_t)2) #define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< SDIO_SEND_REL_ADDR for SD Card */ #define SD_CMD_SET_DSR ((uint8_t)4) #define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) #define SD_CMD_HS_SWITCH ((uint8_t)6) #define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) #define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) #define SD_CMD_SEND_CSD ((uint8_t)9) #define SD_CMD_SEND_CID ((uint8_t)10) #define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD Card doesn't support it */ #define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) #define SD_CMD_SEND_STATUS ((uint8_t)13) #define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) #define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) #define SD_CMD_SET_BLOCKLEN ((uint8_t)16) #define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) #define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) #define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) #define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< SD Card doesn't support it */ #define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< SD Card doesn't support it */ #define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) #define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) #define SD_CMD_PROG_CID ((uint8_t)26) /*!< reserved for manufacturers */ #define SD_CMD_PROG_CSD ((uint8_t)27) #define SD_CMD_SET_WRITE_PROT ((uint8_t)28) #define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) #define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) #define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< To set the address of the first write block to be erased. (For SD card only) */ #define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< To set the address of the last write block of the continuous range to be erased. (For SD card only) */ #define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< To set the address of the first write block to be erased. (For MMC card only spec 3.31) */ #define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< To set the address of the last write block of the continuous range to be erased. (For MMC card only spec 3.31) */ #define SD_CMD_ERASE ((uint8_t)38) #define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD Card doesn't support it */ #define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD Card doesn't support it */ #define SD_CMD_LOCK_UNLOCK ((uint8_t)42) #define SD_CMD_APP_CMD ((uint8_t)55) #define SD_CMD_GEN_CMD ((uint8_t)56) #define SD_CMD_NO_CMD ((uint8_t)64) /** * @brief Following commands are SD Card Specific commands. * SDIO_APP_CMD should be sent before sending these commands. */ #define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< For SD Card only */ #define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< For SD Card only */ #define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< For SD Card only */ #define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< For SD Card only */ #define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< For SD Card only */ #define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< For SD Card only */ #define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O Card only */ #define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O Card only */ /** * @brief Following commands are SD Card Specific security commands. * SDIO_APP_CMD should be sent before sending these commands. */ #define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD Card only */ #define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD Card only */ #define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD Card only */ #define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD Card only */ #define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD Card only */ #define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD Card only */ #define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD Card only */ #define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD Card only */ #define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD Card only */ #define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD Card only */ #define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD Card only */ /** * @brief SD detection on its memory slot */ #define SD_PRESENT ((uint8_t)0x01) #define SD_NOT_PRESENT ((uint8_t)0x00) /** * @brief Supported SD Memory Cards */ #define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) #define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) #define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) #define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003) #define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) #define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) #define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) #define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) /** * @} */ /** @defgroup STM32_EVAL_SDIO_SD_Exported_Macros * @{ */ /** * @} */ /** @defgroup STM32_EVAL_SDIO_SD_Exported_Functions * @{ */ void SD_DeInit(void); SD_Error SD_Init(void); SDTransferState SD_GetStatus(void); SDCardState SD_GetState(void); uint8_t SD_Detect(void); SD_Error SD_PowerON(void); SD_Error SD_PowerOFF(void); SD_Error SD_InitializeCards(void); SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo); SD_Error SD_GetCardStatus(SD_CardStatus *cardstatus); SD_Error SD_EnableWideBusOperation(uint32_t WideMode); SD_Error SD_SelectDeselect(uint32_t addr); SD_Error SD_ReadBlock(uint8_t *readbuff, uint32_t ReadAddr, uint16_t BlockSize); SD_Error SD_ReadMultiBlocks(uint8_t *readbuff, uint32_t ReadAddr, uint16_t BlockSize, uint32_t NumberOfBlocks); SD_Error SD_WriteBlock(uint8_t *writebuff, uint32_t WriteAddr, uint16_t BlockSize); SD_Error SD_WriteMultiBlocks(uint8_t *writebuff, uint32_t WriteAddr, uint16_t BlockSize, uint32_t NumberOfBlocks); SDTransferState SD_GetTransferState(void); SD_Error SD_StopTransfer(void); SD_Error SD_Erase(uint32_t startaddr, uint32_t endaddr); SD_Error SD_SendStatus(uint32_t *pcardstatus); SD_Error SD_SendSDStatus(uint32_t *psdstatus); SD_Error SD_ProcessIRQSrc(void); SD_Error SD_WaitReadOperation(void); SD_Error SD_WaitWriteOperation(void); #ifdef __cplusplus } #endif #endif /* __STM32_EVAL_SDIO_SD_H */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/