/**
  ******************************************************************************
  * @file    WWDG/WWDG_Reset/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 


/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32_eval.h"

/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup WWDG_Reset
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint32_t TimingDelay = 0;

/* Private function prototypes -----------------------------------------------*/
void Delay(__IO uint32_t nTime);

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     

  /* Initialize LED1 and Key Button mounted on STM3210X-EVAL board */       
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI);


  /* Check if the system has resumed from WWDG reset */
  if (RCC_GetFlagStatus(RCC_FLAG_WWDGRST) != RESET)
  { 
    /* WWDGRST flag set */
    /* Turn on LED1 */
    STM_EVAL_LEDOn(LED1);

    /* Clear reset flags */
    RCC_ClearFlag();
  }
  else
  {
    /* WWDGRST flag is not set */
    /* Turn off LED1 */
    STM_EVAL_LEDOff(LED1);
  }

  /* Setup SysTick Timer for 1 msec interrupts  */
  if (SysTick_Config(SystemCoreClock / 1000))
  { 
    /* Capture error */ 
    while (1);
  }

  /* WWDG configuration */
  /* Enable WWDG clock */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE);

/* On Value line devices, WWDG clock counter = (PCLK1 (24MHz)/4096)/8 = 732 Hz (~1366 us)  */
/* On other devices, WWDG clock counter = (PCLK1(36MHz)/4096)/8 = 1099 Hz (~910 us)  */
  WWDG_SetPrescaler(WWDG_Prescaler_8);

  /* Set Window value to 80; WWDG counter should be refreshed only when the counter
    is below 80 (and greater than 64) otherwise a reset will be generated */
  WWDG_SetWindowValue(80);

  /* - On Value line devices,
    Enable WWDG and set counter value to 127, WWDG timeout = ~1366 us * 64 = 87.42 ms 
    In this case the refresh window is: ~1366us * (127-80) = 64.20 ms < refresh window < ~1366us * 64 = 87.42ms
     - On other devices
    Enable WWDG and set counter value to 127, WWDG timeout = ~910 us * 64 = 58.25 ms 
    In this case the refresh window is: ~910 us * (127-80) = 42.77 ms < refresh window < ~910 us * 64 = 58.25ms     
  */
  WWDG_Enable(127);
   
  while (1)
  {
    /* Toggle LED2 */
    STM_EVAL_LEDToggle(LED2);

#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) 
    /* Insert 44 ms delay */
    Delay(44);
#else
    /* Insert 66 ms delay */
    Delay(66);
#endif    

    /* Update WWDG counter */
    WWDG_SetCounter(127);
  }
}

/**
  * @brief  Inserts a delay time.
  * @param  nTime: specifies the delay time length, in milliseconds.
  * @retval None
  */
void Delay(__IO uint32_t nTime)
{ 
  TimingDelay = nTime;
  while(TimingDelay != 0)
  {
  }
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {}
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/