/**
  ******************************************************************************
  * @file    SPI/Simplex_Interrupt/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "platform_config.h"

/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup SPI_Simplex_Interrupt
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus;

/* Private define ------------------------------------------------------------*/
#define BufferSize 32

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
SPI_InitTypeDef SPI_InitStructure;
uint8_t SPI_MASTER_Buffer_Tx[BufferSize] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
                                            0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C,
                                            0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12,
                                            0x13, 0x14, 0x15, 0x16, 0x17, 0x18,
                                            0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E,
                                            0x1F, 0x20};
uint8_t SPI_SLAVE_Buffer_Rx[BufferSize];
__IO uint8_t TxIdx = 0, RxIdx = 0;
volatile TestStatus TransferStatus = FAILED;

/* Private functions ---------------------------------------------------------*/
void RCC_Configuration(void);
void GPIO_Configuration(void);
void NVIC_Configuration(void);
TestStatus Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength);

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  /* System clocks configuration ---------------------------------------------*/
  RCC_Configuration();

  /* NVIC configuration ------------------------------------------------------*/
  NVIC_Configuration();

  /* GPIO configuration ------------------------------------------------------*/
  GPIO_Configuration();

  /* SPI_MASTER configuration ------------------------------------------------*/
  SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Tx;
  SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
  SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
  SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
  SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
  SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
  SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
  SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
  SPI_InitStructure.SPI_CRCPolynomial = 7;
  SPI_Init(SPI_MASTER, &SPI_InitStructure);

  /* SPI_SLAVE configuration -------------------------------------------------*/
  SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Rx;
  SPI_InitStructure.SPI_Mode = SPI_Mode_Slave;
  SPI_Init(SPI_SLAVE, &SPI_InitStructure);

  /* Enable SPI_MASTER TXE interrupt */
  SPI_I2S_ITConfig(SPI_MASTER, SPI_I2S_IT_TXE, ENABLE);
  /* Enable SPI_SLAVE RXNE interrupt */
  SPI_I2S_ITConfig(SPI_SLAVE, SPI_I2S_IT_RXNE, ENABLE);

  /* Enable SPI_SLAVE */
  SPI_Cmd(SPI_SLAVE, ENABLE);
  /* Enable SPI_MASTER */
  SPI_Cmd(SPI_MASTER, ENABLE);

  /* Transfer procedure */
  while (RxIdx < BufferSize)
  {}

  /* Check the correctness of written dada */
  TransferStatus = Buffercmp(SPI_SLAVE_Buffer_Rx, SPI_MASTER_Buffer_Tx, BufferSize);
  /* TransferStatus = PASSED, if the transmitted and received data
     are equal */
  /* TransferStatus = FAILED, if the transmitted and received data
     are different */

  while (1)
  {}
}

/**
  * @brief  Configures the different system clocks.
  * @param  None
  * @retval None
  */
void RCC_Configuration(void)
{
  /* PCLK2 = HCLK/2 */
  RCC_PCLK2Config(RCC_HCLK_Div2); 

/* Enable peripheral clocks --------------------------------------------------*/
#ifdef USE_STM3210C_EVAL
  /* Enable GPIO clock for SPI_MASTER and SPI_SLAVE */
  RCC_APB2PeriphClockCmd(SPI_MASTER_GPIO_CLK | SPI_SLAVE_GPIO_CLK |
                         RCC_APB2Periph_AFIO, ENABLE);

  /* Enable SPI_MASTER Periph clock */
  RCC_APB1PeriphClockCmd(SPI_MASTER_CLK, ENABLE);                           
#else
  /* Enable SPI_MASTER clock and GPIO clock for SPI_MASTER and SPI_SLAVE */
  RCC_APB2PeriphClockCmd(SPI_MASTER_GPIO_CLK | SPI_SLAVE_GPIO_CLK |
                         SPI_MASTER_CLK, ENABLE);
#endif
  /* Enable SPI_SLAVE Periph clock */
  RCC_APB1PeriphClockCmd(SPI_SLAVE_CLK, ENABLE);
}

/**
  * @brief  Configures the different GPIO ports.
  * @param  None
  * @retval None
  */
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

#ifdef USE_STM3210C_EVAL
  /* Enable SPI3 Pins Software Remapping */
  GPIO_PinRemapConfig(GPIO_Remap_SPI3, ENABLE);
#endif

  /* Configure SPI_MASTER pins: SCK and MOSI ---------------------------------*/
  /* Configure SCK and MOSI pins as Alternate Function Push Pull */
  GPIO_InitStructure.GPIO_Pin = SPI_MASTER_PIN_SCK | SPI_MASTER_PIN_MOSI;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_Init(SPI_MASTER_GPIO, &GPIO_InitStructure);
  
  /* Configure SPI_SLAVE pins: SCK and MISO ---------------------------------*/
  /* Configure SCK and MOSI pins as Input Floating */
  GPIO_InitStructure.GPIO_Pin = SPI_SLAVE_PIN_SCK ;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(SPI_SLAVE_GPIO, &GPIO_InitStructure);
  /* Configure MISO pin as Alternate Function Push Pull */
  GPIO_InitStructure.GPIO_Pin = SPI_SLAVE_PIN_MISO;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_Init(SPI_SLAVE_GPIO, &GPIO_InitStructure);
}

/**
  * @brief  Configure the nested vectored interrupt controller.
  * @param  None
  * @retval None
  */
void NVIC_Configuration(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

  /* 1 bit for pre-emption priority, 3 bits for subpriority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);

  /* Configure and enable SPI_MASTER interrupt -------------------------------*/
  NVIC_InitStructure.NVIC_IRQChannel = SPI_MASTER_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  /* Configure and enable SPI_SLAVE interrupt --------------------------------*/
  NVIC_InitStructure.NVIC_IRQChannel = SPI_SLAVE_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
  NVIC_Init(&NVIC_InitStructure);
}

/**
  * @brief  Compares two buffers.
  * @param  pBuffer1, pBuffer2: buffers to be compared.
  * @param  BufferLength: buffer's length
  * @retval PASSED: pBuffer1 identical to pBuffer2
  *         FAILED: pBuffer1 differs from pBuffer2
  */
TestStatus Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength)
{
  while (BufferLength--)
  {
    if (*pBuffer1 != *pBuffer2)
    {
      return FAILED;
    }

    pBuffer1++;
    pBuffer2++;
  }

  return PASSED;
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {}
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/