/**
  ******************************************************************************
  * @file    Lib_DEBUG/RunTime_Check/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32f10x_ip_dbg.h"
#include "stm32_eval.h"
#include <stdio.h>

/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup Lib_DEBUG_RunTime_Check
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
 USART_InitTypeDef USART_InitStructure;

/* Private function prototypes -----------------------------------------------*/
#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
       
  GPIO_InitTypeDef GPIOA_InitStructure;

  /* USARTx configured as follow:
        - BaudRate = 115200 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
  */
  USART_InitStructure.USART_BaudRate = 115200;
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;
  USART_InitStructure.USART_StopBits = USART_StopBits_1;
  USART_InitStructure.USART_Parity = USART_Parity_No;
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;

  STM_EVAL_COMInit(COM1, &USART_InitStructure);

  /* Initialize all peripherals pointers */
  debug();
  
  printf("\r\n STM32F10x Firmware Library compiled with FULL ASSERT function... \n\r");
  printf("...Run-time checking enabled  \n\r");

  /* Simulate wrong parameter passed to library function ---------------------*/
  /* To enable SPI1 clock, RCC_APB2PeriphClockCmd function must be used and
     not RCC_APB1PeriphClockCmd */
  RCC_APB1PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
  
  /* Some member of GPIOA_InitStructure structure are not initialized */
  GPIOA_InitStructure.GPIO_Pin = GPIO_Pin_6;
  GPIOA_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  /* GPIOA_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; */
  GPIO_Init(GPIOA, &GPIOA_InitStructure);
  
  while (1)
  {
  }

}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number */

  printf("\n\r Wrong parameter value detected on\r\n");
  printf("       file  %s\r\n", file);
  printf("       line  %d\r\n", line);
    
  /* Infinite loop */
  /* while (1)
  {
  } */
}

#endif

/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(EVAL_COM1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while(USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
  {
  }

  return ch;
}

/**
  * @}
  */

/**
  * @}
  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/