/**
  ******************************************************************************
  * @file    FLASH/Write_Protection/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"

/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup FLASH_Write_Protection
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus;

/* Private define ------------------------------------------------------------*/
/* Define the STM32F10x FLASH Page Size depending on the used device */
#if defined (STM32F10X_HD) || defined (STM32F10X_HD_VL) || (STM32F10X_CL) || defined (STM32F10X_XL)
  #define FLASH_PAGE_SIZE    ((uint16_t)0x800)
  #define FLASH_PAGES_TO_BE_PROTECTED (FLASH_WRProt_Pages12to13 | FLASH_WRProt_Pages14to15)  
#else
  #define FLASH_PAGE_SIZE    ((uint16_t)0x400)
  #define FLASH_PAGES_TO_BE_PROTECTED (FLASH_WRProt_Pages24to27 | FLASH_WRProt_Pages28to31)  
#endif

#define BANK1_WRITE_START_ADDR  ((uint32_t)0x08006000)
#define BANK1_WRITE_END_ADDR    ((uint32_t)0x08008000)
 
/* Uncomment this line to program the Falsh pages */
//#define FLASH_PAGE_PROGRAM
/* Uncomment this line to Enable Write Protection */
//#define WRITE_PROTECTION_ENABLE
/* Uncomment this line to Disable Write Protection */
#define WRITE_PROTECTION_DISABLE

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/  
uint32_t EraseCounter = 0x0, Address = 0x0;
uint16_t Data = 0x1753;
uint32_t WRPR_Value = 0xFFFFFFFF, ProtectedPages = 0x0;
uint32_t NbrOfPage;
volatile FLASH_Status FLASHStatus = FLASH_COMPLETE;
volatile TestStatus MemoryProgramStatus = PASSED;

/* Private function prototypes -----------------------------------------------*/  
/* Private functions ---------------------------------------------------------*/

/**
  * @brief   Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     
  
  /* Unlock the Flash Program Erase controller */  
  FLASH_Unlock();

  /* Get pages write protection status */
  WRPR_Value = FLASH_GetWriteProtectionOptionByte();

#ifdef WRITE_PROTECTION_DISABLE
  
  /* Get pages already write protected */
  ProtectedPages = ~(WRPR_Value | FLASH_PAGES_TO_BE_PROTECTED);
  
  /* Check if desired pages are already write protected */
  if((WRPR_Value | (~FLASH_PAGES_TO_BE_PROTECTED)) != 0xFFFFFFFF )
  {
    /* Erase all the option Bytes */
    FLASHStatus = FLASH_EraseOptionBytes();
    
  /* Check if there is write protected pages */
  if(ProtectedPages != 0x0)
  {
      /* Restore write protected pages */
      FLASHStatus = FLASH_EnableWriteProtection(ProtectedPages);
    }
    /* Generate System Reset to load the new option byte values */
    NVIC_SystemReset();
  }

#elif defined WRITE_PROTECTION_ENABLE

  /* Get current write protected pages and the new pages to be protected */
  ProtectedPages =  (~WRPR_Value) | FLASH_PAGES_TO_BE_PROTECTED; 
  
  /* Check if desired pages are not yet write protected */
  if(((~WRPR_Value) & FLASH_PAGES_TO_BE_PROTECTED )!= FLASH_PAGES_TO_BE_PROTECTED)
  {
  
    /* Erase all the option Bytes because if a program operation is 
      performed on a protected page, the Flash memory returns a 
      protection error */
    FLASHStatus = FLASH_EraseOptionBytes();

    /* Enable the pages write protection */
    FLASHStatus = FLASH_EnableWriteProtection(ProtectedPages);
  
    /* Generate System Reset to load the new option byte values */
    NVIC_SystemReset();
  }
  
#endif

#ifdef FLASH_PAGE_PROGRAM  
  /* Get the number of pages to be erased */
  NbrOfPage = (BANK1_WRITE_END_ADDR - BANK1_WRITE_START_ADDR) / FLASH_PAGE_SIZE;

  /* The selected pages are not write protected */
  if ( (WRPR_Value & FLASH_PAGES_TO_BE_PROTECTED) != 0x00)
  {
    /* Clear All pending flags */
    FLASH_ClearFlag(FLASH_FLAG_BSY | FLASH_FLAG_EOP|FLASH_FLAG_PGERR |FLASH_FLAG_WRPRTERR);	

    /* erase the FLASH pages */
    for(EraseCounter = 0; (EraseCounter < NbrOfPage) && (FLASHStatus == FLASH_COMPLETE); EraseCounter++)
    {
      FLASHStatus = FLASH_ErasePage(BANK1_WRITE_START_ADDR + (FLASH_PAGE_SIZE * EraseCounter));
    }
  
    /* FLASH Half Word program of data 0x1753 at addresses defined by  BANK1_WRITE_START_ADDR and BANK1_WRITE_END_ADDR */
    Address = BANK1_WRITE_START_ADDR;

    while((Address < BANK1_WRITE_END_ADDR) && (FLASHStatus == FLASH_COMPLETE))
    {
      FLASHStatus = FLASH_ProgramHalfWord(Address, Data);
      Address = Address + 2;
    }

    /* Check the correctness of written data */
    Address = BANK1_WRITE_START_ADDR;

    while((Address < BANK1_WRITE_END_ADDR) && (MemoryProgramStatus != FAILED))
    {
      if((*(__IO uint16_t*) Address) != Data)
      {
        MemoryProgramStatus = FAILED;
      }
      Address += 2;
    }
  }
  else
  { 
    /* Error to program the flash : The desired pages are write protected */ 
    MemoryProgramStatus = FAILED;
  }
 
#endif

  while (1)
  {
  }
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/