/**
  ******************************************************************************
  * @file    FLASH/Program/main.c 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"


/** @addtogroup STM32F10x_StdPeriph_Examples
  * @{
  */

/** @addtogroup FLASH_Program
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus;

/* Private define ------------------------------------------------------------*/
/* Define the STM32F10x FLASH Page Size depending on the used STM32 device */
#if defined (STM32F10X_HD) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) || defined (STM32F10X_XL)
  #define FLASH_PAGE_SIZE    ((uint16_t)0x800)
#else
  #define FLASH_PAGE_SIZE    ((uint16_t)0x400)
#endif

#define BANK1_WRITE_START_ADDR  ((uint32_t)0x08008000)
#define BANK1_WRITE_END_ADDR    ((uint32_t)0x0800C000)

#ifdef STM32F10X_XL
 #define BANK2_WRITE_START_ADDR   ((uint32_t)0x08088000)
 #define BANK2_WRITE_END_ADDR     ((uint32_t)0x0808C000)
#endif /* STM32F10X_XL */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/  
uint32_t EraseCounter = 0x00, Address = 0x00;
uint32_t Data = 0x3210ABCD;
uint32_t NbrOfPage = 0x00;
volatile FLASH_Status FLASHStatus = FLASH_COMPLETE;
volatile TestStatus MemoryProgramStatus = PASSED;

#ifdef STM32F10X_XL
volatile TestStatus MemoryProgramStatus2 = PASSED;
#endif /* STM32F10X_XL */

/* Private function prototypes -----------------------------------------------*/   
/* Private functions ---------------------------------------------------------*/

/**
  * @brief   Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f10x_xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f10x.c file
     */     

/* Porgram FLASH Bank1 ********************************************************/       
  /* Unlock the Flash Bank1 Program Erase controller */
  FLASH_UnlockBank1();

  /* Define the number of page to be erased */
  NbrOfPage = (BANK1_WRITE_END_ADDR - BANK1_WRITE_START_ADDR) / FLASH_PAGE_SIZE;

  /* Clear All pending flags */
  FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_PGERR | FLASH_FLAG_WRPRTERR);	

  /* Erase the FLASH pages */
  for(EraseCounter = 0; (EraseCounter < NbrOfPage) && (FLASHStatus == FLASH_COMPLETE); EraseCounter++)
  {
    FLASHStatus = FLASH_ErasePage(BANK1_WRITE_START_ADDR + (FLASH_PAGE_SIZE * EraseCounter));
  }
  
  /* Program Flash Bank1 */
  Address = BANK1_WRITE_START_ADDR;

  while((Address < BANK1_WRITE_END_ADDR) && (FLASHStatus == FLASH_COMPLETE))
  {
    FLASHStatus = FLASH_ProgramWord(Address, Data);
    Address = Address + 4;
  }

  FLASH_LockBank1();
  
  /* Check the correctness of written data */
  Address = BANK1_WRITE_START_ADDR;

  while((Address < BANK1_WRITE_END_ADDR) && (MemoryProgramStatus != FAILED))
  {
    if((*(__IO uint32_t*) Address) != Data)
    {
      MemoryProgramStatus = FAILED;
    }
    Address += 4;
  }

#ifdef STM32F10X_XL
/* Program FLASH Bank2 ********************************************************/  
  /* Unlock the Flash Bank2 Program Erase controller */
  FLASH_UnlockBank2();

  /* Define the number of page to be erased */
  NbrOfPage = (BANK2_WRITE_END_ADDR - BANK2_WRITE_START_ADDR) / FLASH_PAGE_SIZE;

  /* Clear All pending flags */
  FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_PGERR | FLASH_FLAG_WRPRTERR);	

  /* Erase the FLASH pages */
  for(EraseCounter = 0; (EraseCounter < NbrOfPage) && (FLASHStatus == FLASH_COMPLETE); EraseCounter++)
  {
    FLASHStatus = FLASH_ErasePage(BANK2_WRITE_START_ADDR + (FLASH_PAGE_SIZE * EraseCounter));
  }
  
  /* Program Flash Bank2 */
  Address = BANK2_WRITE_START_ADDR;

  while((Address < BANK2_WRITE_END_ADDR) && (FLASHStatus == FLASH_COMPLETE))
  {
    FLASHStatus = FLASH_ProgramWord(Address, Data);
    Address = Address + 4;
  }

  FLASH_LockBank2();
    
  /* Check the correctness of written data */
  Address = BANK2_WRITE_START_ADDR;

  while((Address < BANK2_WRITE_END_ADDR) && (MemoryProgramStatus2 != FAILED))
  {
    if((*(__IO uint32_t*) Address) != Data)
    {
      MemoryProgramStatus2 = FAILED;
    }
    Address += 4;
  }

#endif /* STM32F10X_XL */ 
  
  while (1)
  {
  }
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  while (1)
  {
  }
}

#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/