/**
  @page DMA_ADC_TIM1 DMA ADC1 TIM1 example
  
  @verbatim
  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
  * @file    DMA/ADC_TIM1/readme.txt 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Description of the DMA ADC1 TIM1 example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example provides a description of how to use a DMA channel to transfer
continuously a data from a peripheral (ADC1) to another peripheral (TIM1) supporting
DMA transfer.
The ADC channel14 is configured to be converted continuously. TIM1_CH1 is configured
to generate a PWM signal on its output.
The dedicated DMA1 channel5 is configured to transfer in circular mode the last ADC 
channel14 converted value to the TIM1_CCR1 register. The DMA channel request is driven
by the TIM1 update event. The duty cycle of TIM1_CH1 output signal is then changed
each time the input voltage value on ADC channel14 pin is modified.
The duty cycle variation can be visualized on oscilloscope on the TIM1_CH1 pin
PA.08 while changing the analog input on ADC channel14 using the potentiometer.

@par Directory contents 

  - DMA/ADC_TIM1/stm32f10x_conf.h    Library Configuration file
  - DMA/ADC_TIM1/stm32f10x_it.c      Interrupt handlers
  - DMA/ADC_TIM1/stm32f10x_it.h      Interrupt handlers header file
  - DMA/ADC_TIM1/main.c              Main program
  - DMA/ADC_TIM1/system_stm32f10x.c  STM32F10x system source file
  
@par Hardware and Software environment 

  - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, 
    XL-Density, High-Density Value line, Medium-Density Value line, Low-Density 
    and Low-Density Value line Devices.
  
  - This example has been tested with STMicroelectronics STM32100B-EVAL (Medium-Density
    Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density and
    XL-Density) and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily
    tailored to any other supported device and development board.

  - STM32100B-EVAL Set-up 
    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin 
      PC.04 (potentiometer RV2)
    - Connect an oscilloscope to TIM1_CH1 (PA.08) pin 
    
  - STM3210C-EVAL Set-up 
    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin 
      PC.04 (potentiometer RV1)
    - Connect an oscilloscope to TIM1_CH1 (PA.08) pin  

  - STM3210E-EVAL Set-up 
    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin 
      PC.04 (potentiometer RV1)
    - Connect an oscilloscope to TIM1_CH1 (PA.08) pin  

  - STM3210B-EVAL Set-up 
    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin 
      PC.04 (potentiometer RV1)
    - Connect an oscilloscope to TIM1_CH1 (PA.08) pin       

  - STM32100E-EVAL Set-up 
    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin 
      PC.04 (potentiometer RV1)
    - Connect an oscilloscope to TIM1_CH1 (PA.08) pin  
	
	
@par How to use it ? 

In order to make the program work, you must do the following :
 - Copy all source files from this example folder to the template folder under
   Project\STM32F10x_StdPeriph_Template
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the example 

@note
 - Low-density Value line devices are STM32F100xx microcontrollers where the 
   Flash memory density ranges between 16 and 32 Kbytes.
 - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
 - Medium-density Value line devices are STM32F100xx microcontrollers where
   the Flash memory density ranges between 64 and 128 Kbytes.  
 - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
 - High-density Value line devices are STM32F100xx microcontrollers where
   the Flash memory density ranges between 256 and 512 Kbytes.
 - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 256 and 512 Kbytes.
 - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 512 and 1024 Kbytes.
 - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
    
 * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
 */