/**
  @page CortexM3_Mode_Privilege CortexM3 Mode Privilege example
  
  @verbatim
  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
  * @file    CortexM3/Mode_Privilege/readme.txt 
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    08-April-2011
  * @brief   Description of the CortexM3 Mode Privilege example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example shows how to modify CortexM3 Thread mode privilege access and stack.
CortexM3 Thread mode is entered on Reset, and can be entered as a result of an
exception return.  

The associated program is used to:

1. Switch the Thread mode stack from Main stack to Process stack

2. Switch the Thread mode from Privileged to Unprivileged

3. Switch the Thread mode from Unprivileged back to Privileged

To monitor the stack used and the privileged or unprivileged access level of code
in Thread mode, a set of variables is available within the program. It is also
possible to use the 'Cortex register' window of the debugger.

@par Directory contents 

  - CortexM3/Mode_Privilege/stm32f10x_conf.h    Library Configuration file
  - CortexM3/Mode_Privilege/stm32f10x_it.c      Interrupt handlers
  - CortexM3/Mode_Privilege/stm32f10x_it.h      Header for stm32f10x_it.c
  - CortexM3/Mode_Privilege/main.c              Main program
  - CortexM3/Mode_Privilege/system_stm32f10x.c  STM32F10x system source file
  
  
@par Hardware and Software environment 

  - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, 
    High-Density Value line, XL-Density, Medium-Density Value line, Low-Density 
    and Low-Density Value line Devices.
  
  - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density 
    Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL 
    (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL 
    (Medium-Density) evaluation boards and can be easily tailored to any other 
    supported device and development board.
    
@par How to use it ? 

In order to make the program work, you must do the following :
 - Copy all source files from this example folder to the template folder under
   Project\STM32F10x_StdPeriph_Template
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the example 

@note
 - Low-density Value line devices are STM32F100xx microcontrollers where the 
   Flash memory density ranges between 16 and 32 Kbytes.
 - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
 - Medium-density Value line devices are STM32F100xx microcontrollers where
   the Flash memory density ranges between 64 and 128 Kbytes.  
 - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
 - High-density Value line devices are STM32F100xx microcontrollers where
   the Flash memory density ranges between 256 and 512 Kbytes.
 - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 256 and 512 Kbytes.
 - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 512 and 1024 Kbytes.
 - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
    
 * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
 */