--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/TIM10_PWMOutput/readme.txt	Mon Oct 03 21:19:15 2011 +1030
@@ -0,0 +1,85 @@
+/**
+  @page TIM10_PWMOutput TIM10 PWM Output example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    TIM/TIM10_PWMOutput/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the  TIM10 PWM Output example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description
+
+This example shows how to configure the TIM10 peripheral in PWM (Pulse Width Modulation) 
+mode.
+
+The TIM10CLK frequency is set to SystemCoreClock (72 MHz), to get TIM10 counter
+clock at 24 MHz the Prescaler is computed as following:
+   - Prescaler = (TIM10CLK / TIM10 counter clock) - 1
+
+The TIM10 is running at 36 KHz: TIM10 Frequency = TIM10 counter clock/(ARR + 1)
+                                                = 24 MHz / 666 = 36 KHz
+The TIM10 CCR1 register value is equal to 500, so the TIM10 Channel 1 generates a 
+PWM signal with a frequency equal to 36 KHz and a duty cycle equal to 37.5%:
+TIM10 Channel1 duty cycle = (TIM10_CCR1/ TIM10_ARR + 1)* 100 = 37.5%
+
+The PWM waveform can be displayed using an oscilloscope.
+
+
+@par Directory contents 
+
+  - TIM/TIM10_PWMOutput/stm32f10x_conf.h    Library Configuration file
+  - TIM/TIM10_PWMOutput/stm32f10x_it.c      Interrupt handlers
+  - TIM/TIM10_PWMOutput/stm32f10x_it.h      Interrupt handlers header file
+  - TIM/TIM10_PWMOutput/main.c              Main program 
+  - TIM/TIM10_PWMOutput/system_stm32f10x.c  STM32F10x system source file
+
+@par Hardware and Software environment 
+
+  - This example runs only on STM32F10x XL-Density Devices.
+  
+  - This example has been tested with STMicroelectronics STM3210E-EVAL (XL-Density) 
+    evaluation board and can be easily tailored to any development board.    
+
+  - STM3210E-EVAL Set-up 
+    - Connect PF.06 (TIM10_CH1 remapped pin) to an oscilloscope to monitor the PWM waveform
+
+  
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes. 
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+   
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */