Mercurial > ~darius > hgwebdir.cgi > stm32temp
diff libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/7PWM_Output/readme.txt @ 0:c59513fd84fb
Initial commit of STM32 test code.
author | Daniel O'Connor <darius@dons.net.au> |
---|---|
date | Mon, 03 Oct 2011 21:19:15 +1030 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/7PWM_Output/readme.txt Mon Oct 03 21:19:15 2011 +1030 @@ -0,0 +1,110 @@ +/** + @page TIM_7PWM_Output TIM 7 PWM Output example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file TIM/7PWM_Output/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the TIM 7 PWM Output example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example shows how to configure the TIM1 peripheral to generate 7 PWM signals +with 4 different duty cycles (50%, 37.5%, 25% and 12.5%). + +TIM1CLK = SystemCoreClock, Prescaler = 0, TIM1 counter clock = SystemCoreClock +SystemCoreClock is set to 72 MHz for Low-density, Medium-density, High-density +and Connectivity line devices. For Low-Density Value line, Medium-Density and +High-density Value line devices, SystemCoreClock is set to 24 MHz. + +The objective is to generate 7 PWM signal at 17.57 KHz: + - TIM1_Period = (SystemCoreClock / 17570) - 1 +The channel 1 and channel 1N duty cycle is set to 50% +The channel 2 and channel 2N duty cycle is set to 37.5% +The channel 3 and channel 3N duty cycle is set to 25% +The channel 4 duty cycle is set to 12.5% +The Timer pulse is calculated as follows: + - ChannelxPulse = DutyCycle * (TIM1_Period - 1) / 100 + +The TIM1 waveform can be displayed using an oscilloscope. + +@par Directory contents + + - TIM/7PWM_Output/stm32f10x_conf.h Library Configuration file + - TIM/7PWM_Output/stm32f10x_it.c Interrupt handlers + - TIM/7PWM_Output/stm32f10x_it.h Interrupt handlers header file + - TIM/7PWM_Output/main.c Main program + - TIM/7PWM_Output/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + + + - STM3210C-EVAL Set-up + - Connect the TIM1 pins(TIM1 full remapped pins) to an oscilloscope to monitor the different waveforms: + - TIM1_CH1 pin (PE.08) + - TIM1_CH1N pin (PE.09) + - TIM1_CH2 pin (PE.10) + - TIM1_CH2N pin (PE.11) + - TIM1_CH3 pin (PE.12) + - TIM1_CH3N pin (PE.13) + - TIM1_CH4 pin (PE.14) + + - STM3210E-EVAL, STM3210B-EVAL, STM32100B-EVAL and STM32100E-EVAL Set-up + - Connect the TIM1 pins to an oscilloscope to monitor the different waveforms: + - TIM1_CH1 pin (PA.08) + - TIM1_CH1N pin (PB.13) + - TIM1_CH2 pin (PA.09) + - TIM1_CH2N pin (PB.14) + - TIM1_CH3 pin (PA.10) + - TIM1_CH3N pin (PB.15) + - TIM1_CH4 pin (PA.11) + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> + */