--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt	Mon Oct 03 21:19:15 2011 +1030
@@ -0,0 +1,99 @@
+/**
+  @page DAC_OneChannelDMA_Escalator DAC one channel DMA escalator example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    DAC/OneChannelDMA_Escalator/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the DAC one channel DMA escalator example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use one DAC channel mode with DMA to generate an
+escalator signal on DAC channel1 output.
+
+DAC channel1 conversion is configured to be triggered by TIM6 TRGO triggers and
+without noise/triangle wave generation. 8bit right data alignment is selected
+since we choose to access DAC_DHR8R1 register.
+DMA2 channel3 is configured to transfer continuously, byte by byte, a 6-byte
+buffer to the DAC1 register DAC_DHR8R1.
+
+The transferred 6bytes buffer is made to have an escalator signal on DAC channel1
+output. DAC channel1 is then enabled. Once TIM6 is enabled, each TIM6 TRGO update
+event generate a DMA request which transfer data  to the DAC1 register and DAC
+conversion is started. The escalator signal can be visualized by connecting PA.04
+pin to an oscilloscope.
+
+@par Directory contents 
+
+  - DAC/OneChannelDMA_Escalator/stm32f10x_conf.h     Library Configuration file
+  - DAC/OneChannelDMA_Escalator/stm32f10x_it.c       Interrupt handlers
+  - DAC/OneChannelDMA_Escalator/stm32f10x_it.h       Header for stm32f10x_it.c
+  - DAC/OneChannelDMA_Escalator/main.c               Main program
+  - DAC/OneChannelDMA_Escalator/system_stm32f10x.c   STM32F10x system source file
+  
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, XL-Density,
+    High-Density Value line, Medium-Density Value line and Low-Density Value 
+    line Devices.
+  
+  - This example has been tested with STMicroelectronics STM32100B-EVAL 
+    (Medium-Density Value line),STM32100E-EVAL (High-Density Value line),
+     STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and 
+     XL-Density) evaluation boards and can be easily tailored to any other 
+     supported device and development board.   
+
+  - STM32100B-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope 
+    @note Make shure that jumper JP2 is open.
+    
+  - STM3210C-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    @note Make shure that jumper JP15 is open.
+        
+  - STM3210E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+	
+  - STM32100E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */