--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt	Mon Oct 03 21:19:15 2011 +1030
@@ -0,0 +1,98 @@
+/**
+  @page ADC_RegSimul_DualMode ADC regular simultaneous dual mode example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    ADC/RegSimul_DualMode/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the ADC regular simultaneous dual mode example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use ADC1 and ADC2 in regular simultaneous dual mode.
+ADC1 is configured to convert channel14 and channel17 regular channels continuously.
+ADC2 is configured to convert channel11 and channel12 regular channels continuously.
+The connection between internal Vref and channel17 is enabled for ADC1.
+
+Once the regular channels conversion is started by software, channel14 is converted
+on ADC1 and channel11 is converted on ADC2 on the same time. The 32bits conversion 
+result is then stored on ADC1 DR register. The DMA will transfer this data which
+will be stored ADC_DualConvertedValueTab table. Consecutively to those conversion,
+channel17 is converted on ADC1 and channel12 on ADC2. The combined conversion
+result is also transferred by DMA to the same destination buffer. 
+
+The same procedure is repeated until the specified number of data to be transferred
+by DMA is reached.
+
+The ADCs clocks are set to 14 MHz.
+
+@par Directory contents 
+
+  - ADC/RegSimul_DualMode/stm32f10x_conf.h     Library Configuration file
+  - ADC/RegSimul_DualMode/stm32f10x_it.c       Interrupt handlers
+  - ADC/RegSimul_DualMode/stm32f10x_it.h       Interrupt handlers header file
+  - ADC/RegSimul_DualMode/system_stm32f10x.c   STM32F10x system source file
+  - ADC/RegSimul_DualMode/main.c               Main program
+
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, 
+    XL-Density and Low-Density Devices.
+
+  - This example has been tested with STMicroelectronics STM3210C-EVAL 
+    (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and
+    STM3210B-EVAL (Medium-Density) evaluation boards and can be easily tailored
+    to any other supported device and development board.
+
+  - STM3210C-EVAL Set-up 
+    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
+      PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC 
+      Channel12 mapped on pin PC.02.
+
+  - STM3210E-EVAL Set-up 
+    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
+      PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC 
+      Channel12 mapped on pin PC.02.
+
+  - STM3210B-EVAL Set-up 
+    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
+      PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC 
+      Channel12 mapped on pin PC.02.          
+
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */