--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s	Mon Oct 03 21:19:15 2011 +1030
@@ -0,0 +1,347 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f10x_ld.s
+  * @author    MCD Application Team
+  * @version   V3.5.0
+  * @date      11-March-2011
+  * @brief     STM32F10x Low Density Devices vector table for Atollic toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address.
+  *                - Configure the clock system 
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m3
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM, 0xF108F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+	bx	lr
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMPER_IRQHandler
+	.word	RTC_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN1_TX_IRQHandler
+	.word	USB_LP_CAN1_RX0_IRQHandler
+	.word	CAN1_RX1_IRQHandler
+	.word	CAN1_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_IRQHandler
+	.word	TIM1_UP_IRQHandler
+  .word TIM1_TRG_COM_IRQHandler
+  .word TIM1_CC_IRQHandler
+  .word TIM2_IRQHandler
+  .word TIM3_IRQHandler
+  .word 0
+  .word I2C1_EV_IRQHandler
+  .word I2C1_ER_IRQHandler
+  .word 0
+  .word 0
+  .word SPI1_IRQHandler
+  .word 0
+  .word USART1_IRQHandler
+  .word USART2_IRQHandler
+  .word 0
+  .word EXTI15_10_IRQHandler
+	.word	RTCAlarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+  .word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	BootRAM        /* @0x108. This is for boot in RAM mode for
+                          STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMPER_IRQHandler
+	.thumb_set TAMPER_IRQHandler,Default_Handler
+
+	.weak	RTC_IRQHandler
+	.thumb_set RTC_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_IRQHandler
+	.thumb_set EXTI2_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN1_TX_IRQHandler
+	.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN1_RX0_IRQHandler
+	.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN1_RX1_IRQHandler
+	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN1_SCE_IRQHandler
+	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_IRQHandler
+	.thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_IRQHandler
+	.thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_IRQHandler
+	.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTCAlarm_IRQHandler
+	.thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/