--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/sirf.py	Sun Feb 22 21:26:49 2009 +1030
@@ -0,0 +1,339 @@
+#!/usr/bin/env python
+
+import time, struct
+
+# SiRF at 9600 baud
+nmea2sirf = '$PSRF100,0,9600,8,1,0*0C\r\n'
+
+# NMEA at 4800 baud
+# Use like so
+# s.write(sirf.Parser.OrdLsttoStr(sirf.Parser.Encap(sirf.sirf2nmea)))
+sirf2nmea = [ 0x81, 0x02, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, 0x05, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x12, 0xc0 ]
+
+#s.write(sirf.Parser.OrdLsttoStr(sirf.Parser.Encap(sirf.getver)))
+getver = [ 0x84, 0x00 ]
+
+# Messages from engine
+sirfoutpktdsc = {
+    0x01 : "Reference Navigation Data",
+    0x02 : "Measured Navigation Data",
+    0x03 : "True Tracker Data",
+    0x04 : "Measured Tracking Data",
+    0x05 : "Raw Track Data",
+    0x06 : "SW Version",
+    0x07 : "Clock Status",
+    0x08 : "50 BPS Subframe Data",
+    0x09 : "Throughput",
+    0x0a : "Error ID",
+    0x0b : "Command Acknowledgment",
+    0x0c : "Command NAcknowledgment",
+    0x0d : "Visible List",
+    0x0e : "Almanac Data",
+    0x0f : "Ephemeris Data",
+    0x10 : "Test Mode 1",
+    0x11 : "Differential Corrections",
+    0x12 : "OkToSend",
+    0x13 : "Navigation Parameters",
+    0x14 : "Test Mode 2/3/4",
+    0x1b : "DGPS Status",
+    0x1c : "Nav. Lib. Measurement Data",
+    0x1d : "Nav. Lib. DGPS Data",
+    0x1e : "Nav. Lib. SV State Data",
+    0x1f : "Nav. Lib. Initialization Data",
+    0x29 : "Geodetic Navigation Data",
+    0x2d : "Raw DR Data",
+    0x2e : "Test Mode 3",
+    0x30 : "SiRFDRive-specific Class of Output Messages",
+    0x31 : "Test Mode 4 for SiRFLoc v2.x only",
+    0x32 : "SBAS Parameters",
+    0x34 : "1 PPS Time Message",
+    0x37 : "Test Mode 4",
+    0x38 : "Extended Ephemeris Data",
+    0xe1 : "SiRF internal message",
+    0xff : "Development Data"
+    }
+
+# Messages to engine
+sirfinpktdsc = {
+    0x35 : "Advanced Power Management",
+    0x80 : "Initialize Data Source",
+    0x81 : "Switch to NMEA Protocol",
+    0x82 : "Set Almanac (upload)",
+    0x83 : "Handle Formatted Dump Data",
+    0x84 : "Poll Software Version",
+    0x85 : "DGPS Source Control",
+    0x86 : "Set Main Serial Port",
+    0x87 : "Switch Protocol",
+    0x88 : "Mode Control",
+    0x89 : "DOP Mask Control",
+    0x8a : "DGPS Mode",
+    0x8b : "Elevation Mask",
+    0x8c : "Power Mask",
+    0x8d : "Editing Residual",
+    0x8e : "Steady-State Detection",
+    0x8f : "Static Navigation",
+    0x90 : "Poll Clock Status",
+    0x91 : "Set DGPS Serial Port",
+    0x92 : "Poll Almanac",
+    0x93 : "Poll Ephemeris",
+    0x94 : "Flash Update",
+    0x95 : "Set Ephemeris (upload)",
+    0x96 : "Switch Operating Mode",
+    0x97 : "Set TricklePower Parameters",
+    0x98 : "Poll Navigation Parameters",
+    0xa5 : "Set UART Configuration",
+    0xa6 : "Set Message Rate",
+    0xa7 : "Set Low Power Acquisition Parameters",
+    0xa8 : "Poll Command Parameters",
+    0xaa : "Set SBAS Parameters",
+    0xac : "SiRFDRive-specific",
+    0xb4 : "Marketing Software Configuration",
+    0xb6 : "Set UART Configuration",
+    0xe4 : "SiRF internal message",
+    0xe8 : "Extended Ephemeris Proprietary"
+}
+
+def fmtlatlong(x):
+    deg = int(x)
+    min = abs((x - deg) * 60)
+    sec = abs((min - int(min)) * 60)
+
+    return "%d d %d m %.3f s" % (deg, int(min), sec)
+
+class Parser(object):
+    def __init__(self, s = None):
+        self.buffer = []
+        self.state = 'init1'
+
+        self.fr_err = 0 # Framing error
+        self.ck_err = 0 # Checksum error
+        self.rx_cnt = 0 # Packet count
+
+        self.pktq = []
+        self.s = s
+
+    def processstr(self, data):
+        return self.process(map(ord, data))
+
+    def process(self, data):
+        pktcount = 0
+        for d in data:
+            #print "Looking at 0x%02x, state = %s" % (d, self.state)
+            if (self.state == 'init1'):
+                self.buffer = []
+                if (d != 0xa0):
+                    print "Start1 framing error, got 0x%02x, expected 0xa0" % d
+                    self.fr_err += 1
+                    continue
+
+                self.state = 'init2'
+            elif (self.state == 'init2'):
+                if (d != 0xa2):
+                    print "Start2 framing error, got 0x%02x, expected 0xa2" % d
+                    self.fr_err += 1
+                    self.state = 'init1'
+                    continue
+
+                self.state = 'sizemsb'
+            elif (self.state == 'sizemsb'):
+                #print "Size1 - 0x%02x" % (d)
+                if d > 0x7f:
+                    print "size msb too high (0x%02x)" % (d)
+                    self.fr_err += 1
+                    self.state = 'init1'
+                    continue
+                
+                self.sizemsb = d
+                self.state = 'sizelsb'
+            elif (self.state == 'sizelsb'):
+                #print "Size2 - 0x%02x" % (d)
+                self.dataleft = self.sizemsb << 8 | d
+                if self.dataleft < 1:
+                    print "size is too small (0x%04x)" % (self.dataleft)
+                    self.state = 'init1'
+                    continue
+                if self.dataleft > 1024:
+                    print "size too large (0x%04x)" % (self.dataleft)
+                    self.fr_err += 1
+                    self.state = 'init1'
+                    continue
+                #print "Pkt size - 0x%04x" % (self.dataleft)
+                self.state = 'data'
+            elif (self.state == 'data'):
+                self.buffer.append(d)
+                self.dataleft = self.dataleft - 1
+
+                if self.dataleft == 0:
+                    self.state = 'cksum1'
+
+            elif (self.state == 'cksum1'):
+                self.cksummsb = d
+                self.state = 'cksum2'
+            elif (self.state == 'cksum2'):
+                self.rxcksum = self.cksummsb << 8 | d
+                self.state = 'end1'
+            elif (self.state == 'end1'):
+                if (d != 0xb0):
+                    print "End1 framing error, got 0x%02x, expected 0xb0" % d
+                    self.state = 'init1'
+                    self.fr_err += 1
+                    continue
+                
+                self.state = 'end2'
+            elif (self.state == 'end2'):
+                if (d != 0xb3):
+                    print "End2 framing error, got 0x%02x, expected 0xb3" % d
+                    self.fr_err += 1
+                else:
+                    pktsum = reduce(lambda x, y: x + y, self.buffer) & 0x7fff
+                    if (pktsum != self.rxcksum):
+                        print "Checksum error: got 0x%04x, expected 0x%04x" % \
+                              (self.rxcksum, pktsum)
+                        print "buffer is %s" % (str(self.buffer))
+                        self.state = 'init1'
+                        self.ck_err += 1
+                    else:
+                        p = Parser.Build(self.buffer)
+                        #self.pktq.append(p)
+                        pktcount += 1
+                        self.rx_cnt += 1
+
+                self.state = 'init1'
+            else:
+                print "Invalid state %s! Resetting" % (self.state)
+                self.state = 'init1'
+
+        return pktcount
+
+    def dumpmsgs(self, s):
+        s.setTimeout(0.1)
+        while True:
+            self.processstr(s.read(100))
+
+    @classmethod
+    def Encap(self, data):
+        cksum = reduce(lambda x, y: x + y, data)
+        dlen = len(data)
+        out = [ 0xa0, 0xa2 ]
+        out.append((dlen & 0xff00) >> 8)
+        out.append(dlen & 0xff)
+        out.extend(data)
+        out.append((cksum & 0xff00) >> 8)
+        out.append(cksum & 0xff)
+        out.extend([0xb0, 0xb3])
+        return out
+
+    @classmethod
+    def OrdLsttoStr(self, data):
+        return reduce(lambda x, y: x + y, map(chr, data))
+
+    @classmethod
+    def Build(self, data):
+        t = time.time()
+        t1 = time.strftime("%Y/%m/%d %H:%M:%S", time.localtime(t))
+        t2 = (t - int(t)) * 1e3
+        tfmt = "%s.%03d" % (t1, t2)
+        if data[0] in sirfoutpktdsc:
+            print "%s: Got out packet 0x%02x : %s" % (tfmt, data[0], sirfoutpktdsc[data[0]])
+        elif data[0] in sirfinpktdsc:
+            print "%s: Got in packet 0x%02x : %s" % (tfmt, data[0], sirfinpktdsc[data[0]])
+        else:
+            print "%s: Unknown packet type 0x%02x" % (tfmt, data[0])
+            print "Payload - " + str(data[1:])
+
+        if data[0] == 0x02:
+            fmt = '>iiihhhBBBhIB'
+            datastr = reduce(lambda x, y: x + y, map(chr, data[1:struct.calcsize(fmt) + 1]))
+            (xpos, ypos, zpos, xvel, yvel, zvel, mode1, hdop, mode2, gpsweek, gpstow, nsats) = \
+                   struct.unpack(fmt, datastr)
+            
+            satprn = []
+            for i in xrange(nsats):
+                satprn.append(data[struct.calcsize(fmt) + i])
+
+            xvel = float(xvel) / 8
+            yvel = float(yvel) / 8
+            zvel = float(zvel) / 8
+            print "                          Position: X: %d, Y: %d, Z: %d" % (xpos, ypos, zpos)
+            print "                          Velocity: X: %.2f, Y: %.2f, Z: %.2f" % (xvel, yvel, zvel)
+        elif data[0] == 0x06:
+            nulidx = data.index(0)
+            print "                          SW Ver : %s" % (reduce(lambda x, y: x + y, map(chr, data[1:nulidx])))
+        elif data[0] == 0x0a:
+            errid = data[1] << 8 | data[2]
+            dlen = (data[3] << 8 | data[4]) * 4
+            print "                          Error ID : 0x%04x" % (errid)
+            if dlen > 0:
+                print "                          Length   : 0x%04x" % (dlen)
+                print "                          Payload  : %s" % (data[5:])
+        elif data[0] == 0x0b:
+            print "                          Cmd Ack  : 0x%02x" % (data[1])
+        elif data[0] == 0x0c:
+            print "                          Cmd NAck : 0x%02x" % (data[1])
+        elif data[0] == 0x29:
+            fixtype = {
+                0 : "none",
+                1 : "1-SV KF",
+                2 : "2-SV KF",
+                3 : "3-SV KF",
+                4 : "4+-SV KF",
+                5 : "2D",
+                6 : "3D",
+                7 : "DR"
+                }
+            fmt = '>HHHIHBBBBHIiiiiBHHHHHIIIHIIIIIHHBBB'
+            datastr = reduce(lambda x, y: x + y, map(chr, data[1:struct.calcsize(fmt) + 1]))
+            (navval, navtype, ewn, tow, year, month, day, hour, minute, second, satlst,
+             latitude, longitude, alt_elip, alt_msl, datum, sog, cog, magvar, climbrate,
+             headrate, estHPE, estVPE, estTE, estHVE, clockbias, CBerr, clockdrift,
+             CDerr, distance, distanceErr, headErr, numsvs, hdop, addmodeinfo) = \
+             struct.unpack(fmt, datastr)
+            tow = float(tow) / 1e3
+            latitude = float(latitude) / 1e7
+            longitude = float(longitude) / 1e7
+            alt_elip = float(alt_elip) / 1e2
+            alt_msl = float(alt_msl) / 1e2
+            sog = float(sog) / 1e2
+            cog = float(cog) / 1e2
+            climbrate = float(climbrate) / 1e2
+            headrate = float(headrate) / 1e2
+            estHPE = float(estHPE) / 1e2
+            estVPE = float(estVPE) / 1e2
+            estTE = float(estTE) / 1e2
+            estHVE = float(estHVE) / 1e2
+            clockbias = float(clockbias) / 1e2
+            CBerr = float(CBerr) / 1e2
+            clockdrift = float(clockdrift) / 1e2
+            CDerr = float(CDerr) / 1e2
+            headErr = float(headErr) / 1e2
+            hdop = float(hdop) / 5
+
+            print "                          Fix : %s, Sats : %d, Lat: %s, Long: %s, Alt: %.2fm" % \
+                  (fixtype[navtype & 0x7], numsvs, fmtlatlong(latitude), fmtlatlong(longitude), \
+                   alt_msl)
+        elif data[0] == 0xa6:
+            print "                          Message rate : MID 0x%02x, rate 0x%02x" % (data[2], data[3])
+
+def enablemsgs(s):
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x09, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x0d, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x29, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    #s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x34, 0x01, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x1b, 0x01, 0x00, 0x00, 0x00, 0x00])))
+
+    
+def disablemsgs(s):
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    #s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x32, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00])))
+    s.write(Parser.OrdLsttoStr(Parser.Encap([0xa6, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00])))
+
+