Mercurial > ~darius > hgwebdir.cgi > iec1107
annotate hw/README @ 13:156313694bbb default tip
Use the correct exponent for Watts (ie 0 not 1).
author | Daniel O'Connor <darius@dons.net.au> |
---|---|
date | Sat, 18 Jan 2014 05:23:02 +0000 |
parents | b4de1b6f8f78 |
children |
rev | line source |
---|---|
7 | 1 The schematic is designed using TinyCAD |
2 http://sourceforge.net/projects/tinycad/ | |
3 | |
4 The stripboard was laid out using VeeCAD | |
5 http://veecad.com/ | |
6 | |
7 It is loosly based on an Elektor circuit | |
8 http://www.elektor.com/magazines/2002/march/iec1107-electricity-meter-interface.55617.lynkx | |
9 | |
10 The photodiode is an OSRAM BP104, the IR LED a generic IR LED from Jaycar | |
11 (ZD1947) with a spectral peak of 940nm. The opamp is an LM348 clone (ZL3348 from Jaycar). | |
12 | |
13 The 6 pin interface is a TinyOS FTDI breakout | |
14 http://www.tinyosshop.com/index.php?route=product/product&product_id=186 | |
15 | |
16 Mine is running at 5V but it works at 3.3V. | |
17 | |
18 I needed to use the FTDI EEPROM tool to invert the TX & RX sense using FT_Prog from | |
19 http://www.ftdichip.com/Support/Utilities.htm | |
20 | |
21 The need to invert could be rectified by modifying the circuit, but modifying the | |
22 EEPROM was a lot easier than changing the circuit. | |
23 | |
12
b4de1b6f8f78
Add note about nice looking circuit.
Daniel O'Connor <darius@dons.net.au>
parents:
7
diff
changeset
|
24 Hardware like this looks better |
b4de1b6f8f78
Add note about nice looking circuit.
Daniel O'Connor <darius@dons.net.au>
parents:
7
diff
changeset
|
25 http://wiki.volkszaehler.org/hardware/controllers/ir-schreib-lesekopf-usb-ausgang |
b4de1b6f8f78
Add note about nice looking circuit.
Daniel O'Connor <darius@dons.net.au>
parents:
7
diff
changeset
|
26 |