/*
 * Console code for AVR board
 *
 * Copyright (c) 2008-2009
 *      Daniel O'Connor <darius@dons.net.au>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <ctype.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include "cons.h"
#include "cons-reg.h"

#define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu)/((baudRate)*16l)-1)

/* Receive buffer storage */
consbuf_t cmd;

/*
 * Stub to use with fdevopen
 *
 * We ignore f and always succeed
 */
static int _putc(char c, FILE *f) {
    cons_putc(c);
    return(0);
}

/*
 * Stub to use with fdevopen
 *
 * We ignore f and always succeed
 */
static int _getc(FILE *f) {
    return(cons_getc());
}

void
cons_init(void) {
    _SETBAUD(38400);
    
    /* Enable receiver and transmitter. Turn on rx interrupts */
    _INITREG();
    
    fdevopen(_putc, NULL); /* Open stdout */
    fdevopen(NULL, _getc); /* Open stdin */
}

int
cons_putc(char c) {
    loop_until_bit_is_set(_UCSRA, _UDRE);
    _UDR = c;

    return(0);
}

void
cons_putsP(const char *addr) {
    char c;

    while ((c = pgm_read_byte_near(addr++)))
	cons_putc(c);
}

void
cons_puts(const char *addr) {
    while (*addr)
	cons_putc(*addr++);
}

void
cons_puts_dec(uint8_t a, uint8_t l) {
    char	s[4];
    
    if (l && a < 10)
	cons_putsP(PSTR("0"));
    cons_puts(utoa(a, s, 10));
}

void
cons_puts_hex(uint8_t a) {
    char	s[3];
    
    if (a < 0x10)
	cons_putc('0');
    
    cons_puts(utoa(a, s, 16));
}

char
cons_getc(void) {
    while (!(_UCSRA & _BV(_RXC)))
	;
    return (_UDR);
}

/* Rx complete */
ISR(_RXVECT) {
    char c;

    while (_UCSRA & _BV(_RXC)) {
	c = _UDR;
	/* 255 means we're waiting for main to process the command,
	 * just throw stuff away
	 */
	if (cmd.state == 255)
	    continue;
	
	/* End of line? */
	if (c == '\n' || c == '\r') {
	    cmd.buf[cmd.state] = '\0';
	    printf_P(PSTR("\r\n"));
	    cmd.len = cmd.state;
	    cmd.state = 255;
	    continue;
	}
	
	/* Backspace/delete */
	if (c == 0x08 || c == 0x7f) {
	    if (cmd.state > 0) {
		cmd.state--;
		printf_P(PSTR("\010\040\010"));
	    }
	    continue;
	}
	
	/* Anything unprintable just ignore it */
	if (!isprint(c))
	    continue;

	cmd.buf[cmd.state] = tolower(c);

	/* Echo back to the user */
	cons_putc(cmd.buf[cmd.state]);
	
	cmd.state++;
	/* Over flow? */
	if (cmd.state == ((sizeof(cmd.buf) / sizeof(cmd.buf[0])) - 1)) {
	    printf_P(PSTR("\r\nLine too long"));
	    cmd.state = 0;
	    continue;
	}
    }
}

/* Tx complete */
ISR(_TXVECT) {
}